Dell Inspiron Mini 10 UK Netbook Keyboard New Part 0T669N

New UK keyboard - in stock.

Genuine Dell Spare Part

Free UK shipping - next day.

Fits Dell Inspiron 10, 10v & 1011 Models.

Dell Part No 0T669N

EAN-UPC NO 5704327815334

Model V101102BK1

Factory boxed and read to ship.

This keyboard does not fit 1010 models - please see our othe listing thanks.

Fitting Instructions :-

How to remove your Dell Inspiron mini 10V Keyboard

1. Turn off the laptop if it is running. Removing the Dell Inspiron mini 10V keyboard while the laptop is running may cause accidents.
2. Remove those screws with a T-8 or Phillips screwdriver.
3. Turn the laptop back over and open it up. Check and see if the Dell Inspiron mini 10V keyboard is tucked under any plastic pieces. If so, find if those plastic pieces are screwed into anything, and unfasten them as well. If not, it probably uses clamps that can easily be removed.
4. Remove the plastic pieces carefully with a toothpick or plastic pick if there is any in the way.
5. Unscrew any screws at the top (if necessary) and remove the Dell Inspiron mini 10V keyboard itself from top to bottom. You'll notice that the keyboard is connected with a thin, but wide, data cable to the system board at the bottom.
6. Take that same pick and lift the plastic connectors that hold in this data cable in place. Carefully remove the data cable. Now the whole Dell Inspiron mini 10V keyboard should be free.

How to replace Dell Inspiron mini 10V Keyboard.

1. Take the new Inspiron mini 10V keyboard out of the plastic, and slip the data cable back in between the plastic connectors on the system board. Make sure it's all the way in.
2. Use the pick to push the plastic connectors back into place, and make sure it's holding the data cable in.
3. Slip the Inspiron mini 10V keyboard itself into place, from bottom to top. Make sure the screw holes or clamps line up at the top.
4. Refasten the Inspiron mini 10V keyboard in place at the top.
5. If you had to remove any plastic pieces, carefully snap them back in and replace any screws you had to remove.
6. Turn the laptop over and replace all of the keyboard screws.
7. Finally, put the battery back in and power on the laptop.

In stock now we have new dell inspiron 1011 keyboard, which is also a dell mini 10 keyboard,a dell mini 10v keyboard,and has part no 0T669N. This dell netbook keyboardis a genuine dell keyboard, and cheap dell keyboard if you need one for your inspiron mini 1018 or mini 10V machine.